ULTIMATE PROTECTION, ULtimate shine.
Densify, harden, and polish concrete surfaces with minimal effort.
Crystal Densifier
Premera Crystal Densifier is an industry first, burnishable densifier. As a sol-gel, SiO2 based densifier, it is designed to both densify and harden concrete, as well as allow concrete polishers to skip all resin grinding steps in the polishing process and go straight to burnishing to a mirror polish. This revolutionary sol-gel based solution streamlines concrete polishing by eliminating 50% or more of the labor and time involved.
Other products
Related products
FAQs
Yes, Crystal Densifier can be applied to new concrete to enhance its hardness and durability, improving its resistance to wear and tear from the start.
Crystal Densifier can typically be burnished 24 hours after application. This allows sufficient time for the densifier to penetrate and react with the concrete.
Crystal Densifier can be applied using a low-pressure sprayer. For best results, it should be spread evenly using a microfiber applicator or a similar tool.
Crystal Densifier generally has a shelf life of 12 months when stored in a cool, dry place in its original, unopened container. Always check the manufacturer’s guidelines for specific storage recommendations.
Crystal Densifier is a sol-gel, SiO2-based densifier designed to both densify and harden concrete while streamlining the polishing process. Unlike traditional densifiers, it allows you to skip resin grinding steps and go straight to burnishing for a mirror finish.
Crystal Densifier eliminates over 50% of the labor and time typically required for polishing by enabling direct burnishing with high-speed machines after application, providing a fast, durable, and crystal-clear finish.
Yes, Crystal Densifier can be used on both new and existing concrete. Existing surfaces should be prepared to a 100 transitional profile, cleaned thoroughly, and be free from contaminants before application.
Crystal Densifier requires only one hour to cure before burnishing with a high-speed burnishing machine and a diamond pad of the specified grit.
No, Crystal Densifier is ready to use and requires no mixing or dilution. Simply stir the contents to resuspend the nanoparticles before applying it to the surface.
Yes, Crystal Densifier is designed for use on both new and existing concrete. It can be applied to various concrete surfaces, provided they are clean, dry, and have a 100 transitional profile before application.
Location
1 47 Street - Mina Jebel Ali - Jabal Ali Industrial First - Dubai